Jeu de 21 embouts en coffret plastique
Feuille de données
Plus d'information sur le produit
ATTRIBUTS DU PRODUIT
- Dimensions du coffret : 145x85x40
Le jeu comprend :
- 1x bits adaptor E6, 3 (1/4") (article 6715E6,3) dim. 75
- 4x hex bits (article 6469C6,3) dim. 3, 4, 5, 6
- 9x TX profile bit (article 6472C6,3) dim. TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40
- 3x double-crosstip (PZ) bit (article 6466C6,3) dim. PZ1, PZ2, PZ3
- 2x crosstip (PH) bit (article 6463C6,3) dim. PH1, PH2
- 2x slotted bit (article 6460C6,3) dim. 0.5x4.0, 1.2x6.5
Nom du produit | SKU | Article | Dimensions | Quantité | Poids | |
---|---|---|---|---|---|---|
Jeu de 21 embouts en coffret plastique | 621650 | 6776PB21 | - | 21 | 240 | |
Embouts pour vis à fente | 6460C6,3 | 0.5 x 4.0, 1.2 x 6.5 | 2 | |||
Embouts pour vis Pozidriv | 6466C6,3 | PZ 1, PZ 2, PZ 3 | 3 | |||
Embouts pour vis Torx | 6472C6,3 | TX 8, TX 9, TX 10, TX 15, TX 20, TX 25, TX 27, TX 30, TX 40 | 9 | |||
Embouts pour vis 6 pans | 6469C6,3 | 3, 4, 5, 6 | 4 | |||
Embouts pour vis PHILLIPS | 6463C6,3 | PH 1, PH 2 | 2 | |||
Porte-embouts magnétique E 6, 3 (1/4") | 6715E6,3 | E6.3 (1/4")x75 | 1 |
* Les images des produits ne sont pas contractuelles. Toutes les dimensions sont en mm, les poids en grammes.
Safety tips
- Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
- Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
- A rounded tip should be redressed with a file; make sure edges are straight.
- Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
- Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
- A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
- Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
- Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
- Don't use a screwdriver with a split or broken handle.
- Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
manche au design ergonomique
A la qualité supérieure des matériaux utilisés pour la gamme de tournevis Unior viennent s’ajouter des poignées de conception ergonomique qui permettent une excellente qualité de prise.manche tri-matière
Grâce à l’association de surfaces rigides et souples, la poignée spéciale à trois composantes (brevetée Unior) permet une utilisation efficace et confortable qui sollicite très peu le poignet pendant le travail.Prise antidérapante
Conçus pour s’adapter à une large variété de profils de vis et possédant une poignée à trois composantes, les tournevis UNIOR assurent une grande efficacité et une prise antidérapante.