Eristetyt linjapihdit VDE
More About Product
Standards
DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018
Product features
- materiaali: erikoistyökaluteräs
- muottitaottu, täysin karkaistu
- leikkuuterät induktiokarkaistu
- kiillotettu pää
- pintakäsittely: kromattu standardin ISO 1456:2009 mukaisesti
- valmistettu EN IEC 60900 -standardin mukaan
Hyödyt:
- kahvoissa kaksikerrosrakenne - kaksivärinen eristys turvallisuuden varmistamiseksi
Tärkeää!
- jos toinen kerros on näkyvissä, vaihda VDE-työkalusi uuteen
leikkauskapasiteetti (10N=1kg)
619176 | 180 | 1,8 | 2,5 |
* Tuotekuvat ovat suuntaa-antavia. Kaikki mitat on ilmoitettu mm, painot grammoina.
Safety tips
- Pliers should be oiled regularly. A drop of oil at the hinge will lengthen the tool life and assure easy operation.
- When cutting wire with pliers, you should always wear glasses or goggles.
- Don't use pliers for cutting hardened wire, unless specifically manufactured for this purpose.
- Don't expose pliers to excessive heat. This may ruin the tool.
- Don't use pliers as a hammer.
- Don't hammer on the handles. They may crack or break.
- Don't extend the length of plier handles to secure greater leverage.
- Don't use pliers on nuts or bolts. A wrench will do a better job and with less risk of damage to the fastener.
Questions & Answers
-
Are certified insulated tools made through a different procedure than non-certified insulated tools?The tools are made according to the same procedure.
-
Are insulated (VDE) tools considered as personal protective equipment (PPE)?According to EU regulations, VDE tools are not considered as PPE.
-
Is it possible to work with insulated pliers under electrical voltage?Yes, but only by professionals who follow safety requirements and use additional personal protective equipment.
-
Are the VDE tools only being sampled in series production?The high voltage test (at 10kV) is performed fully on each tool. Other tests are performed in accordance with the EN60900 standard.
Täydellinen suoja
Uniorin eristetyt VDE-työkalut antavat parhaan mahdollisen suojan jännitteisten virtapiirien parissa työskentelyyn aina 1000 volttiin asti. Jokainen työkalu on erikseen testattu ja varmistettu iskunkeston, sähköneristyksen, palamattomuuden ja eristepinnoituksen pitävyyden osalta sekä puristustestein.Korkealaatuinen teräs
Eristetyt avaimet, pihdit, ruuvitaltat ja muut sähkötyökalut on valmistettu korkealaatuisesta erikoistyökaluteräksestä ja ne ovat suunniteltu helppoon ja turvalliseen työskentelyyn.VDE säädökset
Uniorin VDE-työkalut valmistetaan ja testataan VDE-säädösten mukaan. Työkalut täyttävät kansainvälisesti tunnustetun eurooppalaisen EN 60900 -standardin säädökset.